---
title: LK8000 Settings
description: "With the Bluefly connected to the Kobo and LK8000 up and running: - Menu | Config | Config 1/3 (this gets you to page 2/3, in the slightly confusing LK8000-speak) | LK8000 Setup | Device Setup - Device A, Name,…"
url: "https://www.blueflyvario.com/docs/lk8000-settings/"
updated: "2024-06-28"
category: General Information
---

# LK8000 Settings

With the Bluefly connected to the Kobo and LK8000 up and running:

- Menu | Config | Config 1/3 (this gets you to page 2/3, in the slightly confusing LK8000-speak) | LK8000 Setup | Device Setup
- Device A, Name, then pick BlueFlyVario off the list and Select
- Back in device Configuration, Device A, you set the baud rate to 115200
- Then Close
- Menu | Config | Config 1/3 |LK8000 Setup
- System Setup | use Next or Prev to get to page 10 Interface
- Configure Custom menu; for one of the ten boxes, pick from the list Device A Config; Close
- Menu | Config | Config 1/3 |LK8000 Setup; System Save; Save as.. or Save New, to save it.

Then to get the interface right:

- Menu | Custom menu | Device A Config, gives access to all the Bluefly Hardware parameters in three pages, but first Use Next to get to BlueFLYVario 3/3,
- Output Mode | pick LK8EX1 from the list and Select | Close

And it will all be working. You can use the Device A Config at any time to change any of the BFV internal parameters.
